Hand pump purchase Raiders: Hand pump troubleshooting

[Pump News] pump in the use of hand-cranked process, what problems often occur? Hand pump common faults and how to solve? Today, Xiaobian in this hand pump common faults to everyone to be a simple Analysis to help you better use hand pump, improve work efficiency. Hand pump purchase Raiders: Hand pump troubleshooting methods 1. Before removing the hand pump, the left and right sides of the gas chamber and liquid chamber were marked to facilitate the subsequent reassembly action. 2. Using a wrench, loosen the small clamp connecting the inlet tube to the liquid chamber. Remove the outlet tube to see the ball and valve seat. Remove the ball and seat and check for other wear and tear on the pump. Chemical corrosion, cracks, etc. phenomenon. 3. Use a wrench to separate the fluid chamber from the pump's intermediate body. Remove the fluid chamber to see the diaphragm and diaphragm clamp. 4. Use a tool or a wrench to secure the left and right edges of the diaphragm clamp and separate the diaphragm assembly from the intermediate body. Then turn clockwise to loosen the diaphragm assembly. After removing the diaphragm from the clamp, remove the shaft from the intermediate body. 5. Use clamps (padded wood) to separate the shaft from the diaphragm assembly and check shaft, clamp, diaphragm for damage and corrosion. The above is the manual pump troubleshooting, for your reference. Further reading: Pump and Valve Tube & Pipe Fittings Exhibition Information 2016 Exhibition Information Industrial Internet (Xiamen) Technology Co., Ltd. Asia Pump Network Editor: Li Juan (QQ / WeChat :) (Service Hotline:)