Hygienic diaphragm pump features
1. No need to irrigate water. The suction stroke is up to 5m. The lift is up to 70m. The outlet pressure is ≥6bar.
2, the flow is spacious, the pass performance is good. Allows the maximum particle diameter to reach 10mm. When pumping mud and impurities, the pump wears little;
3. The head and flow can be adjusted steplessly by the opening of the valve (the air pressure is adjusted between 1 and 7 bar):
4. The pneumatic sanitary pump has no rotating parts and no shaft seal. The diaphragm completely separates the pumped medium from the moving parts of the pump and the workpiece medium, and the transported medium does not leak outward. Therefore, when pumping toxic, volatile or corrosive media, it will not cause environmental pollution and endanger personal safety;
5, no need to use electricity. Safe and reliable in flammable and explosive places;
6, can be submerged in the medium to work;
7. It is easy to use, reliable in operation, and it is only necessary to open and close the gas valve simply by opening and closing. Even if there is no medium running for a long time due to unexpected conditions or the pump is suddenly stopped, the pump will not be damaged. Once overloaded, the pump will automatically stop. Self-protection performance, when the load returns to normal, it can automatically start running;
8. The structure is simple and the wearing parts are few. The pump has a simple structure, convenient installation and maintenance. The medium conveyed by the pump will not touch the valve, the connecting rod and other moving parts, unlike other types of pumps due to the rotor, piston and gear. The wear of the blades and other components causes the performance to gradually decrease;
9, can transport a more viscous liquid (viscosity below 10,000 centipoise);
10, stainless steel sanitary pump does not need to be lubricated with oil, even if it is idling. It has no effect on the pump, which is the biggest feature of the pump.