Oil-free vacuum pump / vacuum pump model: RT3-TW-18L

Oil-free vacuum pump/vacuum pump model: RT3-TW-18LRT3-TW series oil-free vacuum pump is specially designed for various vacuum equipment in the laboratory. It has the characteristics of simple operation, high power, high efficiency, low noise, large flow, etc. It can be used for vacuum concentration, vacuum filtration vacuum pump is an important filtering equipment to improve filtration efficiency and enhance degassing effect. In order to ensure that the filter medium is not polluted, an oil-free diaphragm type vacuum pump is generally used. This type of pump forms a vacuum by reciprocating motion like a rubber film, and the vacuum pressure is generally about 0.08 MPa (single stage). The key to increasing the filtration speed is the amount of exhaust per unit time, that is, the flow rate of the vacuum pump, which is particularly prominent when the filter is large and the viscosity of the medium is high. The service life of the vacuum pump, besides the correct method of use, is mainly reasonable in motor power and design of the vacuum film and fatigue resistance. 1. Provide sufficient motor power to reduce motor heating 2. High efficiency, low noise, optional pressure regulation and exhaust valve configuration 3. Dual-stage pump head pressure can be close to 0.1Mpa, or high-flow structure can be used. The vacuum film is made of high-quality rubber with good oil resistance and fatigue resistance, and is equipped with a reinforced textile skeleton interlayer with a thickness of 3 mm and a greatly improved service life. Model RT3-TW-18L flow (L/min) 18 pressure Mpa0.08 power W50 weight Kg4 size mm200*130*180