The series of stainless steel magnetic pump is composed of pump body, impeller, inner magnetic steel, outer magnetic steel, isolation sleeve, pump inner shaft, pump outer shaft, sliding bearing, rolling bearing, coupling, motor and base. The pump completely solves the disadvantages of running, running, dripping and leaking which cannot be avoided by other pump mechanical seals.
For details, please visit: http://
The series of stainless steel magnetic pump is composed of pump body, impeller, inner magnetic steel, outer magnetic steel, isolation sleeve, pump inner shaft, pump outer shaft, sliding bearing, rolling bearing, coupling, motor and base.
The pump completely solves the disadvantages of running, running, dripping and leaking which cannot be avoided by other pump mechanical seals. The materials of the pump body and the overcurrent parts are made of corrosion-resistant stainless steel, corundum ceramics, tetrafluoro graphite and other materials.
First, the self-priming magnetic pump should be installed horizontally, and the pump body must not bear the weight of the pipeline.
Second, before the pump is used, it should be checked whether the rotation of the motor maple leaf is flexible, non-stop and abnormal, and the fastening bodies should be firm.
3. Unscrew the watering bolt on the pump and add less than three parts of the volume of the pump body, then tighten the bolt.
Fourth, connect the power supply and try to turn it. From the motor end, the operation is consistent with the pump steering mark.
5. Before the pump stops working, close the discharge valve, then turn off the power, and finally close the suction pipe valve.
stainless steel
The magnetic pump draws on foreign new technology on the basis of the CQ-type magnetic drive pump, and has repeatedly researched and tested new products by the company's engineering and technical personnel.
Our company is willing to work together with all customers to create brilliance.
Http://news.chinawj.com.cn Submission: