YCB series arc gear pump pump body structure

Circular arc gear pump in the pump body is equipped with a pair of rotary gear, an active, a passive, relying on the two gears intermeshing, the pump within the entire working chamber is divided into two independent parts. A for the inhalation chamber, B for the discharge chamber. When the gear pump is in operation, the driving gear drives the driven gear to rotate, and when the gear meshes to disengage, a partial vacuum is formed on the suction side, and the liquid is sucked in. The sucked fluid fills each tooth valley of the gear to the discharge side, and when the gear enters into engagement, the liquid is pushed out to form a high-pressure liquid which is discharged outside the pump through the pump discharge port. Gear pump structure Advantages: 1. Compact structure, easy to use and maintain. 2. Has a good self-absorption, so every time you open the pump without filling the liquid. 3 arc gear pump lubrication is delivered by the liquid automatically reached, so do not have to add daily oil lubrication. Arc gear pump is widely used in petroleum, chemical, shipbuilding, electric power, grain and oil, food, medical, building materials, metallurgy and national defense scientific research and other industries. Arc gear pump is suitable for conveying solid particles and fibers, non-corrosive, the temperature is not higher than 150 ℃, viscosity of 5 ~ 1500cst of lubricating oil or other properties of similar lubricating oil. Try all kinds of room temperature freezing and freezing in the outdoor installation and process requirements of insulation occasions.