Vacuum pump filter vacuum pump exhaust filter cleaning precautions

Connor takes you to the cleaning precautions of the vacuum pump exhaust filter: when cleaning the vacuum pump exhaust filter, you need to stop the vacuum pump exhaust filter and discharge the hot oil in the pump, then inject the pump oil. Go to the height of the oil window and run it for a few minutes at the same time, so that the oil inside the vacuum pump exhaust filter can be thoroughly cleaned, which can effectively ensure the normal operation of the filter. It was found that the vacuum pump exhaust filter oil pollution caused serious blackening, emulsification, etc., it is necessary to immediately replace the vacuum pump filter, and then add new oil, which effectively prevents the oil from contaminating the filter.

The working principle of the vacuum pump filter: under the push of pressure and power, the vacuum pump operates. When the vacuum oil mixture splashed in the smoke and vacuum pump passes through the vacuum pump oil mist filter under pressure, it passes through the filter paper and the cotton filter, and the vacuum oil is throttled by the filter for recycling, and the smoke passes through the filter. Go to the outside air. This not only achieves the recycling of vacuum oil, but also avoids environmental pollution and directly discharges clean air. This working principle makes the Riqile vacuum pump fully meet the mainstream industrial requirements of the big era - energy saving and emission reduction.