Zeus pump FSB series fluorine plastic corrosion-resistant pump removal

Zebra pump specializing in the production of FSB series fluorine plastic corrosion-resistant pump is a single-stage single-suction cantilever centrifugal pump, the pump has the characteristics of light, energy saving, economy, space saving, etc., then to the pump Demolition, how to disassemble it? Here is about Zeus pump FSB series fluorine plastic corrosion-resistant pump disassembly introduction. Zeus pump FSB series fluorocarbon corrosion-resistant pump removal 1. FSB series of fluorine plastic corrosion-resistant pump and the motor coupling with a claw coupling, remove the first bracket and the base when the four bolts to pull the pump Disconnect from the motor. 2. Loosen the connection bolts between the pump body and the rear cover and disengage the pump body with a wooden hammer. 3. Loosen the tie rod screw of the impeller shaft and the pump shaft Morse taper connected to the center of the coupling. FSB (L) direct-coupled pump rod screws in the motor hood, remove the motor hood when removed. (Import DN25, DN40, DN50 type pump only need to loosen the two head screws of the motor shaft.) 4. Loosen the hexagonal fixing screw of the mechanical seal moving ring, tap the center rod of the coupling with the wooden hammer, Pull out the impeller, back cover and seal moving ring with the Morse taper of the pump shaft, loosen the fastening screw on the back cover, and take out the stationary ring. 5. Loosen the screws on the front and rear side of the pump shaft, remove the pump shaft, bearings, cleaning oil chamber. Read more: Pumps Valves Pipe Fittings Exhibitions Water Expo Xiamen Maritime Exhibition Internet + Forum Yiwu Expo Fair Mold Top Ten Brands Industrial Internet (Xiamen) Technology Co., Ltd. Asia Pump Network Editor: He Duanhui (QQ / WeChat:) http://beng.liuti.cn/ (service hotline:)